JRready ST2113 Crimp Tool Kit : HDT-46-01 Crimp tool & G454 Go-NoGo Gage
HDT-46-01 is specially designed for crimping 16#,20# contacts of Deutsch DT series connectors.Wire Crimp Range: 14-22AWG .
HDT-46-01 hand crimping tool has 8 selector numbers on selector knob, which can accurately divide the crimp range into 8 gears.
It has an adjusting screw and a lock nut, so the position of the crimping can be adjusted up and down. It is used to locate contacts horizontally and vertically between the indenters of the tools to ensure the accuracy and consistency of the crimp position.
G454 GO-NOGO Gage is a measuring tool. Each crimp tool has accurate indenter working diameter.
The gage is necessary to ensure the crimp tool is in proper working status before using or after being used for a certain period of time.
1.Operate the tool to the fully closed working position. Set the crimp tool to the correct selector number
2.If the “GO” gage end (Green) can pass freely, but the NO-GO end (Red) can not pass completely, it means the tool is still qualified
3.If the “GO” gage end (Green) can not pass, but the NO-GO end (Red) can pass completely, it means the tool is not qualified