JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04)  Turret Head
JRready tools

JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool+TH163(M22520/1-04) Turret Head

Regular price $225.00
/

JRready ACT-M201(Small Version AF8 M22520/1-01) Crimp Tool 12-26AWG 

SPECIFICATIONS:
● Material: Mould Steel
● AWG: 12-26AWG(0.128-3.33mm²)
● Crimper Through-hole Diameter: Φ5.6mm
● Dimensions(mm): 202*53.21*20
● Internal Number: D70
● Weight(g): 457.6

FEATURES:

  • [Crimper Information]: ACT-M201 crimptool meets the crimping standard Of AS22520 Suitable for One-hand Operation
  • [Crimp Style]: 8-impression,has virtually limitless application within the specified wire range of 12 through 26 AWG, which is assures absolute maximum tensile strength with almost every closed barrel contact.
  • [Positioners Adapted]: TH series positioner, TP series positioner, UH2-5 universal adjustable positioner.
  • [8 Selector Numbers]: Crimp depth can be adjusted by an 8 position selector knob conveniently located on the tool frame according to your needs.
  • [Easy to Use]: The ergonomic design of the Crimp Tool makes it easy and painless to use,  the light weight design makes it easy to transport and carry



Selector Numbers Chart
The crimping tool has eight selector numbers, the accurate data is listed as follows:
Selector No. (mm²/AWG) Intender Working Diameter mm/INCH
Selector No.1 0.71/0.028(GO) --0.84/0.033(NO GO)
Selector No.2 0.81/0.032(GO) --0.94/0.037(NO GO)
Selector No.3 0.91/0.036(GO) --1.04/0.041(NO GO)
Selector No.4 0.99/0.039(GO) --1.12/0.044(NO GO)
Selector No.5 1.14/0.045(GO) --1.27/0.050(NO GO)
Selector No.6 1.32/0.052(GO) --1.45/0.057(NO GO)
Selector No.7 1.50/0.059(GO) --1.63/0.064(NO GO)
Selector No.8 1.73/0.068(GO) --1.86/0.073(NO GO)

Turret positioner installing

1.Keep the crimp tool in open position,press turret trigger latch which releases turret to indexing position.
2.Place selected turret head assembly onto retainer ring with socket head screws lined up with tapped holes.
3.After turret head is seated against retainer ring, tighten socket head screws.
4.Turret head & positioner installation is completed.