K1413 Positioner
Locator
positoner for 604927-31 contact
Positioner Head Use With AFM8 m22520/2-01 Crimper for Size 23 604927-31 Pin and 604935 Sockets
K1414 Positioner for Deutsch ASL-ASR Socket
Positioner Head Use With AFM8 m22520/2-01 Crimper for Size 23 604927-31 Pin and 604935 Sockets
positioner for 604935
Positioner Head Use With AFM8 m22520/2-01 Crimper for Size 23 604927-31 Pin and 604935 Sockets
K1413 Positioner
Locator
positoner for 604927-31 contact
Positioner Head Use With AFM8 m22520/2-01 Crimper for Size 23 604927-31 Pin and 604935 Sockets
K1414 Positioner for Deutsch ASL-ASR Socket
Positioner Head Use With AFM8 m22520/2-01 Crimper for Size 23 604927-31 Pin and 604935 Sockets
positioner for 604935
Positioner Head Use With AFM8 m22520/2-01 Crimper for Size 23 604927-31 Pin and 604935 Sockets
JRready tools

Positioner Head Use With AFM8 m22520/2-01 Crimper for Size 23 604927-31 Pin and 604935 Sockets

Regular price $42.00
/

K1413 Positioner for Deutsch ASL-ASR Pin 

This contact positioner will properly locate the 604927-31 pin contact within the AFM8 tool frame for precise and accurate crimping. See below for specific details on which Autosport contact this will work with.

Postioner Details:

  • Contact Number: 604927-31
  • Gender: Pin
  • Contact Size: 23
  • Wire Range: 22-28 Ga.
  • Amperage: 3 Amps
  • AS Series: Autosport Rally Micro (ASR) & (ASL)
  • Required Tool Frame: M22520/2-01

K1414 Positioner for ASL-ASR Socket 

This contact positioner will properly locate the 604935 socket contact within the AFM8 tool frame for precise and accurate crimping. See below for specific details on which Autosport contact this will work with.

K1414 Postioner Details:

  • Contact Number: 604935
  • Gender: Socket
  • Contact Size: 23
  • Wire Range: 22-28 Ga.
  • Amperage: 3 Amps
  • AS Series: Autosport Rally Micro (ASR) & (ASL)
  • Required Tool Frame: M22520/2-01
Installation of Positioner
  1. Before installing the positioner, the tool should be open
  2. Remove the safety clip from positioner guide
  3. Select the correct positioner for terminal crimping
  4. Insert the positioner into positioner guide, push down and then rotate 90 °, until bayonet pins lock
  5. Remove the spring clip from the selector knob, adjust it to the correct selector position