JRready Tester Tips for Retention Tools, 16 Models, Pin & Socket Tips for Contact Sizes 8# / 12# / 16# / 20# / 22# / 23# / 24# / 26#, Aluminum Alloy, Compatible with HT250 Series Retention Tester

PACKAGE LIST:

Tester Tip available in 16 models by contact size:
8#: 68-008-01 (Pin) / 67-008-01 (Socket)
12#: 68-012-01 (Pin) / 67-012-01 (Socket)
16#: 68-016-01 (Pin) / 67-016-01 (Socket)
20#: 68-020-01 (Pin) / 67-020-01 (Socket)
22#: 68-022-01 (Pin) / 67-022-01 (Socket)
23#: 68-023-01 (Pin) / 67-023-01 (Socket)
24#: 68-024-01 (Pin) / 67-024-01 (Socket)
26#: 68-026-01 (Pin) / 67-026-01 (Socket)

[COLOR-CODED BY CONTACT SIZE — PICK THE RIGHT TIP INSTANTLY] 

Each tester tip in this series is color-coded to its contact size, making it straightforward to identify and select the correct tip when working across multiple contact sizes on the same harness. With 16 models covering both pin and socket configurations across sizes 8# through 26#, the color coding reduces selection errors during testing. Refer to the specification chart in this page for the complete color and contact size reference.

[SIMPLE STEPS TO A CONFIRMED CONNECTION] 

Select the tip that matches the contact size and gender, thread it onto the HT250 slide head, and insert it into the connector cavity along the terminal axis. The entire check takes seconds per position — no disassembly, no special setup, and no interpretation required beyond whether the terminal holds at the indicator line.

[TRUSTED ACROSS AEROSPACE, AUTOMOTIVE, AND MARINE WIRING] 

Harness assembly lines, MRO facilities, and field service environments all share the same requirement: every terminal needs to be confirmed seated before the connector is closed. The 68 and 67 series tips cover the contact sizes commonly found in aerospace, automotive, marine, and industrial wiring applications, giving technicians a single organized tip set that handles the full range of contact sizes they're likely to encounter on the bench or in the field.

[PRECISION DIMENSIONS MATCHED TO CONTACT SIZE] 

Each tip is machined to the exact diameter required for its contact size, ensuring consistent and reliable engagement with the contact during testing. The pin tips and socket tips are dimensioned to fit their respective contact geometries accurately across all 16 models, from the largest 8# contacts down to the smallest 26#. 

[ALUMINUM ALLOY — LIGHTWEIGHT AND FIELD-DURABLE] 

These tester tips are machined from aluminum alloy for the combination of low weight and mechanical durability needed in repeated test cycles. The material holds its dimensional accuracy across extended use, maintaining consistent tip geometry for reliable contact engagement over time.

These tester tips are designed for use with the HT250 series retention tester and must be used in combination with a compatible retention tool. The retention tester is sold separately.
Learn more about the HT250 Series Retention Tool here: JRready HT250-1 / HT250-2 / HT250-3 / HT250-4 / HT250-5 / HT250-6 Retention Tool