JRready 12-Pin Deutsch DTM Connector Kit with #20 Solid Contacts, 16-22 AWG - Waterproof Marine, Truck, Motorcycle, Agricultural & Alternative Energy

PACKAGE LIST:

JRready DTM Series 12-Pin connector housings (1 male + 1 female) with solid contacts, 3 Sets
(WM-12P+WM-12S+DTM04-12P+DTM06-12S+0462-201-20141*12+0460-202-20141*12)*3

[MACHINED CONTACTS —THE HIGHEST-RELIABILITY OPTION] 

When circuit count reaches twelve, the cost of a single contact failure scales with it. Solid machined contacts precision-turned from tin bronze hold tighter tolerances than any stamped alternative, delivering consistent mating force across all twelve positions from the first connection to the five-hundredth. The choice for ECU harnesses, multi-channel control systems, and any application where contact integrity across every circuit is non-negotiable.

[IP67 PROTECTION AT THE DTM SERIES' HIGHEST PIN COUNT] 

Twelve wire entries in a single connector housing is where sealing integrity gets tested hardest. The IP67-rated PA66 housings with UL94V-0 flame retardancy in this kit seal every entry point uniformly, maintaining full protection from -40°C to +125°C with withstand voltage tested at 1500V for 1 minute — the same standard as the rest of the DTM series line, scaled up to its most demanding configuration.

[UNIFORM NICKEL PLATING ACROSS ALL TWELVE POSITIONS] 

Full nickel plating end to end means no exposed base metal at any mating surface — across twelve contacts per connector. Each position holds stable conductivity at 7.5A / 250V AC/DC across 20-22AWG (0.5–0.35mm²), with no variation between position one and position twelve. In multi-channel sensor or control applications, that consistency matters as much as the rating itself.

[ONE WEDGE LOCK, TWELVE TERMINALS SECURED] 

With twelve terminals per connector, secondary retention isn't just a safety feature — it's essential to system reliability. The wedge locks in this kit engage all twelve terminal positions simultaneously on both plug and receptacle sides, adding mechanical back-out prevention independent of each terminal's primary tab. Retention force exceeds 60N per position, holding firm through the vibration loads common in heavy truck and off-road environments.

[CROSS-SERIES COMPATIBLE, NO REWIRING REQUIRED] 

Twelve circuits through a single DTM series connector pair is the most efficient way to consolidate a complex harness — fewer connection points, less harness bulk, and fewer potential failure sites than running multiple smaller connectors. Compatible with same-specification DTM connectors already in the field, and extending to HDP20, HD30, and DRC series, this kit slots directly into existing wiring on trucks, agricultural equipment, marine vessels, and alternative energy systems without rewiring from scratch.